Neff C47D22N3GB Manual de usuario descargar pdf (Pagina 9)

5. Press and hold the ± info button for 3 seconds.

Your setting is saved.

First use

Before first use, heat the empty appliance with é Steam

cooking for 20 minutes at 100 °C. Do not open the appliance

door during this time. The appliance is automatically calibrated

(see section: Automatic calibration).

1. Press the operating mode selector so that it pops out.

The appliance switches on.

2. Fill and insert the water tank (see section: Filling the water

tank).

Before using for the first time, moisten the seal in the tank

cover with a little water.

3. Turn the operating mode selector round to é Steam

cooking.

4. Press the Start button.

The appliance heats up to 100 °C. The cooking time

(20 minutes) does not start to count down until the set

temperature has been reached. Do not open the appliance

door during this time.

The cooking operation ends automatically and an audible

signal sounds.

5. Press theKJ clock function button to exit the clock function.

6. Turn the operating mode selector back to the Û position and

click in place to turn off the appliance.

Leave the appliance door ajar until the appliance has cooled

down.

Cleaning the accessories before use

Using soapy water and a soft cloth, clean the accessories

thoroughly before first use.

Operating the appliance

In this section, you can read about

■ how to fill the water tank

■ how to switch the appliance on and off

■ what to note after each cooking operation

Filling the water tank

When you open the appliance door, you will see the water tank

on the right-hand side.

Caution!

Use of unsuitable liquids may damage the appliance

■ Only use fresh tap water, softened water or uncarbonated

mineral water.

■ If your tap water is very hard, we recommend that you use

softened water.

■ Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

You can obtain information about your tap water from your

water supplier. The water hardness can be checked with the

test strips enclosed.

Fill the water tank before each use:

1. Open the appliance door and take out the water tank (fig. A).

2. Fill the water tank with cold water up to the “max” mark (fig.

B).

3. Close the tank cover until you feel it engage.

4. Slide in the water tank all the way (fig. C).

The tank must be flush with the water tank recess (fig. D).

Switching on the appliance

1. Press the operating mode selector so that it pops out.

The appliance switches on.

2. Turn the operating mode selector until the required operating

mode lights up.

A default temperature appears in the temperature display.

Water hardness Setting symbol (temperature dis-

play)

softened

™†‹

soft

™†‚

medium

™†ƒ

hard

™†„

very hard

™†…

PD[

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comentarios a estos manuales

Sin comentarios

Neff C47D22N3GB Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Miniordenadores Neff C47D22N3GB